PTM7950 Phase Change Thermal Pad

Sale price$119.99 CAD
Size: 200mm x 160mm

Ordering 40+ units? Fill out our B2B bulk order request form.

In stock
Description

At long last, the legendary Honeywell PTM7950 Phase Change Thermal Pads from this video are available on lttstore!

If you're looking for a thermal interface material that offers higher performance than standard paste, but you don't want to go through the trouble of something like liquid metal, this is a fantastic middle ground for any PC or DIY server installation. Many laptop manufacturers also go for a thermal pad rather than paste on CPU & GPU installs, so if your older laptop needs a refresh we've got you covered.

PTM7950 sources tend to be overpriced or unreliable in most cases, so we're super proud to offer an affordable, trusted source for this unique thermal material.

First time using a thermal pad like this? Check out our quick installation guide here

IMPORTANT NOTES:

Your thermal pad may undergo one or more phase changes during shipping, resulting in it arriving in a slightly deformed state. This is normal and will not result in performance issues of any kind after installation -- your heatsink will ensure even coverage.

In the event of any leakage from the product packaging, please contact customer support.

Unfortunately we cannot accept returns for thermal pads with open product packaging.

  • 5 stars: 337 (81%)
  • 4 stars: 35 (8%)
  • 3 stars: 19 (5%)
  • 2 stars: 11 (3%)
  • 1 star: 15 (4%)
A
Anonymous (Lebanon)
60mm x 60mm
U SHOULD BUY IT!

Best product ever!!
My CPU temp used to be around 80°C but after using the LTT PTM7950 it dropped to 55°C

A
Adam K. (Canada)
200mm x 160mm
NEW life to OLD hardware

Pulling apart all my old computers laptops and GPUS and installing this PTM7950 and getting much better heat dissipation.

B
Bassir S. (United States)
60mm x 60mm
CPU 275HX Temp from 105c to 75c

CPU 275HX was running at 100c to 105c due to bad manufacturer liquid metal. This authentic PTM7950 dropped it from 105c to 75c. Unbelievable results. I used it for GPU as well, although it was already good.

O
OB (United Kingdom)
60mm x 60mm
The product is good

The product is good, but the inner packaging could be improved. I am not referring to the delivery packaging. It looks like the thermal pad was pressed under heavy weight during shipping, which caused some of the material to leak out from the sides. Better support inside the packaging could help protect the thermal pad and prevent it from being squashed.

M
Mattia L. (Switzerland)
60mm x 60mm
Great, but packaging has issues

The PTM7950 is pretty good, but the packaging is not great: the ptm gets squished and leaks out, making a little bit of it unusable. Putting a thin cardboard spacer around the ptm to create some thickness would easily solve the issue and, even with temperatures changes during the travel, the ptm wouldn't leak out

T
Topher (Canada)
60mm x 60mm
Better than thermal paste by parsecs(yes thats a real measurement)

Install was relatively easy. Temps on my 6800xt have been staying fairly steady at 58°c under full load. Waiting to see how it does long term.so far loving the ptm7950.

M
Mark C. (Canada)
60mm x 60mm
PTM7950 - This stuff works.

Knocked an easy 5–8 degrees off my CPU temps after only one day burn in. Cinebench went from a before of 1928, to an after of 1970 to 2024 the next day.

Tip: Put in freezer for 15–20 minutes before using, cut to size, peel the stiffer side off, apply to CPU, take an ice cube in a plastic bag and put it on the top for 30–45 seconds. It will harden the PTM and make it easier to remove the plastic top protector. No bubbles, no tears in the PTM.

H
Hussam S. (Israel)
60mm x 60mm
Arrived ruined

Unfortunately, due to shipping, the PTM7950 arrived melted and was soo thin I couldn't get to take it off the plastic sheet. I would advise rethinking the packaging it comes in to lower the chances of it happening to other customers.

A
Anonymous (Germany)
60mm x 60mm
Not really that usuable

But the pad as i switched my cpu and wanted to try it.
Unfortunately due to transportation by plane it might have gone trough one or more phase changes, which thinned the whole thing out over the whole pack in which it came in.

I still applied it (as the manual says it still can be used) but it seems to have phased out too thin, as the cpu reached temps 10-15 Degree more as it should, so i replaced the pad a week later with normal paste, and came down to the normal temp the cpu should have.

Pad (or the part which i could apply) was rock hard when i removed it (might be due to the cooler cooling it, might be because it was too thin....dont know).

Did not reach out to customer service as it was my own fault for trying it (read before that it might spread out, but did not think that it would be unusable).

Might be a good solution if it arrives not spread out (some blockers/barriers around the pad might be helpful for that), so would only recommend to buy it if the delivery is over shorter distances (aka north america).

K
Kevin B. (Canada)
200mm x 160mm
Gave my Dell Precision a new life.

As a long time LTT viewer. I thought this product was cool but I didnt think I would functionally need it. Cut to 2 weeks ago, where my 4 year old Dell Precision 5570 started to stutter and freeze due to thermals. Cleaning it out didnt solve. Two seperate reddit post pointed towards using PTM7950 to help overcome Dell's inefficient thermal solution for this model. Ordered, and shipping took a bit longer to stated(shipping companies fault). I applied this and idle temps have gone from 61 to 45 degrees, Cinebench results increased roughly 10%(both pro/post tests done after the machine was under load for about 20 minutes). Most importantly, hitches/freezing fully stopped. The difference is huge and likely isnt attributed to solely the PTM7950. The paste that this replaced was old and some hadcome out the sides and solidified a bit. With that said a new application of paste may have gotten me partially up to the same results. Either way, very satisfying to work with as long as you follow the fridge tip.

J
Johannes V. (Canada)
200mm x 160mm
Easy, convenient and effective

Very nicely packaged, easy to apply, with great instructional video with great performance

M
Marc O. (United States)
Well might have been nice had I actually got anything

Well It's been a few months since I received it and finally opened the package for it today and there was nothing there. Just empty packaging. Not sure what the heck happened at whatever factory was packaging these up. Well guess I'm better off going with random Amazon sellers instead because I at least get an actual product instead of just cardboard.

Guess this is on me for not opening items the day I receive them.

EDIT: I will try reaching out to support to see if they can help. However can't recommend this right now. Hopefully this is a once off, and not a sign of another place that's hit or miss for getting real PTM7950.

EDIT2: Support has responded and they are taking care of me. Hoping it comes back in stock soon so I can give it another try. So please reach out to support if you have issues and they will make things right,

EDIT3: After waiting several months for it to come in stock I was able to order a replacement and it works great. Shoutouts to customer service for making it right even if it took months for a restock.

D
Daniel K. (United States)
Great upgrade for my Framework 13

Installed into my Framework 13 in a snap. Apparently you need a few heat cycles for it to "bed in" properly, but even on my first Cinebench run after installation my laptop was measurably cooler (6-8°C or so) while drawing more power through the CPU, and my score went up. Fans seem more under control to boot. Perfect for a thin-and-light!

Tip: The instructions do say to put this in the fridge first, but this material is *thin* and warms up *very* fast. I kept it in the fridge while I was disassembling and cleaning my laptop's cooling system and only took it out right when it was needed, and it was easy enough to work with. Even holding it with your fingers will warm it back up very quickly, so keep that in mind. Once the film is peeled off the material is fairly sticky, so aim true! I used a plastic spudger tool to help manipulate the sheet into place.

M
Magallanes (United States)
60mm x 60mm
It works

Yep it works

n
nicodemoscain (United States)
60mm x 60mm
I am being absolutely honest when I say this stuff works wonders

I had heard the tales and had seen the videos of others proclaiming how good this stuff is and decided if I was going to get a new gaming laptop, I would have nothing but the best. I got it, put it in (Very easy to do, by the way), and my temps dropped from an insane 80-90 degrees under stress down to 60-70 under stress within a couple days. The difference is night and day with this stuff. Truly amazing to see a product that lives up to the hype.

A
Andrew J. (United States)
200mm x 160mm
I will only give met review to a human being

While the material you sold us worked the manner it was shipped, lost, tracked and continually lost again was abysmal. You left us with no customer support and no human being to speak too.

N
Nope (United States)
60mm x 60mm
Unfortunately, LTT was the only option available at the time

Had a deadline. Otherwise I would have bought from literally anywhere else I could verify was genuine.

A
Aleksandr P. (Azerbaijan)
60mm x 60mm
Great, but not quite easy to install

Good in form factor, but I’ve wasted several pieces as the layer peels off when protection film pulled. Still works great straight after installation, didn’t see any drops in performance.

T
Teddy

Cpu / gpu temps looking stable

D
Daniel F. (Canada)
60mm x 60mm
Better than I could've imagined!

I had the factory installed liquid metal on my laptop pump out years ago, completely unbeknownst to me. I just figured I had a faulty laptop. Now my laptop operates 30 degrees lower on average and I don't have to undervolt it to keep it from constantly crashing. Better than new basically!

J
Jordan (United States)
60mm x 60mm
This Product Saved Me From Buying A New GPU!

My GPU kept overheating and I could not figure out why, having only had the GPU for around a year. I tried under-volting, and changing fan curves but nothing seemed to help in the end. Finally, I learned that it may be the thermal paste experiencing pump out, since I saw my hotspot spiking so high when I used GPU Z and other programs in my monitoring. I took a leap of faith and bought this product because everyone talked about having to reapply thermal paste and I wanted to avoid that. After seeing the LTT videos on this I purchased it and IT COMPLETELY FIXED MY PROBLEMS! Over half a year later and my thermals have never been better! I could see the OEM's thermal paste had left a whole area uncoated when I opened the GPU up and put this PTM in, and I have had zero issues or thermal crashes since! Like others say, throw it in the freezer then snip it to size with scissors! 10/10 would recommend!

Back to top